| HS Codes | Duty Drawback | Unit | Drawback Rate | Drawback cap per unit in Rs. |
| 321511 | Duty Drawback | - | 1.5 | - |
| 321519 | Duty Drawback | - | 1.5 | - |
| 321590 | Duty Drawback | - | 1.5 | - |
PLEASE NOTE: TOTAL INCENTIVE EQUALS SUM OF MEIS AND DUTY DRAWBACK.FOR INSTANCE, FOR Other FALLING UNDER HS CODE: 150290 INCENTIVES FROM THE GOVERNMENT IS 0.15%.
| HS Codes | Product Description | Reward under MEIS |
| 321511 | PRINTING INK, WRITING OR DRAWING | - |
| 321519 | PRINTING INK, WRITING OR DRAWING | - |
| 321590 | PRINTING INK, WRITING OR DRAWING | - |
| Export Item | Quantity | Import Item | Qty Allowed. |
| Colour TV | 1 No. | Wire Wound Resistors | 2 Nos |
| Colour TV | 1 No. | Metal Film Resistors | 37 Nos |
| Colour TV | 1 No. | Carbon Film Resistors | 113 Nos |
| Colour TV | 1 No. | Thermistor | 1 Nos |
| Colour TV | 1 No. | Small Signal Transistor | 1400 Nos |
| Colour TV | 1 No. | Zener Diodes | 5 Nos |
| Colour TV | 1 No. | Plastic Film Capacitors | 22 Nos |
| Colour TV | 1 No. | Aluminium Electrolytic Capacitors | 51 Nos |
| Colour TV | 1 No. | Ceramic Disc Capacitors | 74 Nos |
| Colour TV | 1 No. | Crystals | 1 Nos |
| Colour TV | 1 No. | Power TR | 3 Nos |
| Colour TV | 1 No. | Loud Speaker | Upto 6 Nos. on net to net basis with accountability clause |
| Colour TV | 1 No. | Hard Ferrite | 170 Nos. |
| Colour TV | 1 No. | Soft Ferrite | 275 gms. |
| Colour TV | 1 No. | Single Side PCB | 930 sq. cm |
| Colour TV | 1 No. | Picture tubes | 1 Nos |
| Colour TV | 1 No. | ICs | 300 Nos |
| Colour TV | 1 No. | HIPS (High Impact Polystyrene) | 1.05 Kgs/Kg content in the export product. |
| Colour TV | 1 No. | Remote Control | 1 No. |
| Colour TV | 1 No. | Mains Cord | 1 No. (Length 1 to 1.5 meters) |
| Colour TV | 1 No. | Coils | 17 Nos. |
| Colour TV | 1 No. | Connector | 5 Nos |
| Colour TV | 1 No. | CRT Socket | 1 No. |
| Colour TV | 1 No. | DY Connector | 2 Nos |
| Colour TV | 1 No. | Eyelet | 27 Nos |
| Colour TV | 1 No. | Flyback & SMPS Transformer | 2 Nos |
| Colour TV | 1 No. | Fuse | 1 No. |
| Colour TV | 1 No. | Fuse Holder | 2 Nos |
| Colour TV | 1 No. | Headphone Jack | 1 No. |
| Colour TV | 1 No. | Heat Sink | 5 Nos. |
| Colour TV | 1 No. | LED Holder | 1 No. |
| Colour TV | 1 No. | Line Filter | 2 Nos |
| Colour TV | 1 No. | Power Switch | 1 No. |
| Colour TV | 1 No. | Saw Filter | 1 No. |
| Colour TV | 1 No. | Scart Socket | 1 No |
| Colour TV | 1 No. | Sockets | 5 Nos |
| Colour TV | 1 No. | Tact/Push Switches | 6 Nos |
| Colour TV | 1 No. | Tuner | 1 No. |
| Colour TV | 1 No. | Degaussing Coil | 1 No. |
| Colour TV | 1 No. | PACKING MATERIAL | |
| Colour TV | 1 No. | Paper Kraft | As per Policy for Packing materials |
| Colour TV | 1 No. | EPS (Expanded Polystyrene) | As per Policy for Packing materials |
| Ink Blue Concentrate (Acid Blue 93) (C.I. No. 42780) | 1 kg | Aniline | 2.212 kg |
| Ink Blue Concentrate (Acid Blue 93) (C.I. No. 42780) | 1 kg | Monochloro Benzene | 0.282 kg |
| Ink Blue Concentrate (Acid Blue 93) (C.I. No. 42780) | 1 kg | Caustic Soda Lye/ Flakes (100%) | 1.136 kg |
| Liquid Printing Ink mediums For Flexographic & Gravure process | 1 Kg | Synthetic Resins (Polyamide, VAGH & VMCH (Vinyl Acetate - Vinyl Chloride/ Co-polymer, Acrylic Emulsion,Polyester, and Polyurethane Resin) | 0.227 Kg. |
| Liquid Printing Ink mediums For Flexographic & Gravure process | 1 Kg | Relevant Solvent (Methyl Isobutyl Ketone, Iso propyl Alcohol, N-Propanol, N-Butanol, Butyl Acetate Toluene) | 0.721 Kg. |
| Liquid Printing Ink mediums For Flexographic & Gravure process | 1 Kg | Additives (Titanium Chilates, Wax, Aerosil, PVP Luviscol, silaneamine, Acetyl Acetone, Isopropyl Titanate) | 0.052 Kg. |
| Liquid Printing Inks for Flexographic & Gravure Process in white colour | 1 Kg | Titanium Dioxide | 0.389 Kg. |
| Liquid Printing Inks for Flexographic & Gravure Process in white colour | 1 Kg | Synthetic Resins (Polyamide, VAGH & VMCH (Vinyl Acetate - Vinyl Chloride/ Co-polymer, Acrylic Emulsion,Polyester, and Polyurethane Resin) | 0.241 Kg. |
| Liquid Printing Inks for Flexographic & Gravure Process in white colour | 1 Kg | Relevant Solvent (Methyl Isobutyl Ketone, Iso propyl Alcohol, N-Propanol, N-Butanol, Butyl Acetate Toluene) | 0.315 Kg. |
| Liquid Printing Inks for Flexographic & Gravure Process in white colour | 1 Kg | Additives (Titanium Chilates, Wax, Aerosil, PVP Luviscol, silaneamine, Acetyl Acetone, Isopropyl Titanate) | 0.056 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in varous colours | 1 Kg | Organic pigments/metal complex dyes | 0.101 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in varous colours | 1 Kg | Synthetic Resins (Polyamide, VAGH & VMCH (Vinyl Acetate - Vinyl Chloride/ Co-polymer, Acrylic Emulsion,Polyester, and Polyurethane Resin) | 0.238 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in varous colours | 1 Kg | Relevant Solvent (Methyl Isobutyl Ketone, Iso propyl Alcohol, N-Propanol, N-Butanol, Butyl Acetate Toluene) | 0.608 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in varous colours | 1 Kg | Additives (Titanium Chilates, Wax, Aerosil, PVP Luviscol, silaneamine, Acetyl Acetone, Isopropyl Titanate) | 0.053 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in Black colour | 1 Kg | Carbon Black | 0.103 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in Black colour | 1 Kg | Synthetic Resins (Polyamide, VAGH & VMCH (Vinyl Acetate - Vinyl Chloride/ Co-polymer, Acrylic Emulsion,Polyester, and Polyurethane Resin) | 0.359 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in Black colour | 1 Kg | Relevant Solvent (Methyl Isobutyl Ketone, Iso propyl Alcohol, N-Propanol, N-Butanol, Butyl Acetate Toluene) | 0.487 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in Black colour | 1 Kg | Additives (Titanium Chilates, Wax, Aerosil, PVP Luviscol, silaneamine, Acetyl Acetone, Isopropyl Titanate) | 0.051 Kg. |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin | 1 Kg | Organic Pigments | 0.072 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin | 1 Kg | Phenolic Resin | 0.184 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin | 1 Kg | Hydro Carbon Resin | 0.094 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin | 1 Kg | Pigment Extender | 0.005 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin | 1 Kg | Collodial Fumed Silica | 0.005 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin | 1 Kg | Tung Oil | 0.020 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin | 1 Kg | Carbon Black | 0.190 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin | 1 Kg | Organic Pigments | 0.160 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin | 1 Kg | Phenolic Resin | 0.20 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin | 1 Kg | Hydro Carbon Resin | 0.072 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin | 1 Kg | Pigment Extender | 0.004 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin | 1 Kg | Collodial Fumed Silica | 0.019 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin | 1 Kg | Tung Oil | 0.125 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin | 1 Kg | Organic Pigments | 0.160 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin | 1 Kg | Phenolic Resin | 0.194 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin | 1 Kg | Hydro Carbon Resin | 0.098 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin | 1 Kg | Pigment Extender | 0.004 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin | 1 Kg | Collodial Fumed Silica | 0.019 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin | 1 Kg | Tung Oil | 0.125 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin | 1 Kg | Organic Pigments | 0.130 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin | 1 Kg | Phenolic Resin | 0.194 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin | 1 Kg | Hydro Carbon Resin | 0.098 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin | 1 Kg | Pigment Extender | 0.004 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin | 1 Kg | Collodial Fumed Silica | 0.020 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin | 1 Kg | Tung Oil | 0.125 Kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% | 1 kg | Organic Pigment | 0.14 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% | 1 kg | Phenolic Resin | 0.194 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% | 1 kg | Hydrocarbon Resin | 0.072 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% | 1 kg | Pigment Extender | 0.004 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% | 1 kg | Colloidal Fumed Silica | 0.019 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% | 1 kg | Tung Oil | 0.125 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) | 1 kg | Relevant Alkyd Resin namely Soya Long Oil Length Alkyd Resin having Solid content 100% / Linseed Oil based Alkyd Resin (Long Oil Length) having Solid content 100% | 0.1050 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) | 1 kg | Relevant Oil namely Refined Linseed Oil/ Soyabean Oil | 0.0200 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) | 1 kg | Texanol Isobutyrate | 0.0520 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) | 1 kg | Petroleum Distillate (Distillation Range 240-330 Degree Celsius) | 0.3600 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) | 1 kg | Phenol Modified Rosin Ester/Rosin modified phenolic Resin (Technical Specification Acid values 25 max. softening point (R & B) 110 Degree - 120 Celsius) | 0.4600 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) | 1 kg | Antioxidant namely BHT and MEHQ | 0.0100 kg |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% | 1 MT | Relevant Solvents, namely, Toluene, Iso Propyl Alcohol, Methyl Ethyl Ketone | 719.30 kgs |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% | 1 MT | Polyol | 86.26 kgs |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% | 1 MT | Di-Isocyanate | 18.80 kgs |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% | 1 MT | Ink Additives | 84.06 kgs |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% | 1 MT | Pigment Carbon Black | 105.00 kgs. |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% | 1 MT | Relevant Solvents, namely, Toluene, Iso Propyl Alcohol, Methyl Ethyl Ketone, Ethyl Acetate | 619.30 kgs |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% | 1 MT | Polyol | 72.30 kgs |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% | 1 MT | Di-Isocyanate | 15.80 kgs |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% | 1 MT | Ink Additives | 30.41 kgs |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% | 1 MT | Titanium Dioxide | 278.00 kgs |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% | 1 MT | Relevant Solvents, namely, Iso Propyl Alcohol, Methyl Ethyl Ketone | 770.44 kgs. |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% | 1 MT | Polyol | 72.20 kgs |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% | 1 MT | Di-Isocyanate | 15.83 kgs |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% | 1 MT | Ink Additives | 46.45 kgs |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% | 1 MT | Pigments (Carbon Black, Insoluble Azo, Azo , Phthalocyanine, Dioxazine) | 110.00 kgs. |
| Red Ink Dispersion (Minimum Pigment content 37%) | 1 kg | Pigment (Rubine Red/ ) | 0.381 kg |
| Red Ink Dispersion (Minimum Pigment content 37%) | 1 kg | Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) | 0.147 kg |
| Red Ink Dispersion (Minimum Pigment content 37%) | 1 kg | Linseed Alkyd Resin (100% Solid) | 0.073 kg |
| Red Ink Dispersion (Minimum Pigment content 37%) | 1 kg | Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) | 0.441 kg |
| Red Ink Dispersion (Minimum Pigment content 38%) | 1 kg | Pigment (Rubine Red, ) | 0.391 kg |
| Red Ink Dispersion (Minimum Pigment content 38%) | 1 kg | Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) | 0.094 kg |
| Red Ink Dispersion (Minimum Pigment content 38%) | 1 kg | Linseed Alkyd Resin (100% Solid) | 0.073 kg |
| Red Ink Dispersion (Minimum Pigment content 38%) | 1 kg | Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) | 0.483 kg |
| Blue Ink Dispersion (Minimum Pigment content 38%) | 1 kg | Pigment (Phthalo Blue) | 0.391 kg |
| Blue Ink Dispersion (Minimum Pigment content 38%) | 1 kg | Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) | 0.115 kg |
| Blue Ink Dispersion (Minimum Pigment content 38%) | 1 kg | Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) | 0.535 kg |
| Yellow Ink Dispersion (Minimum Pigment content 31%) | 1 kg | Pigment (AAA Yellow 12) | 0.319 kg |
| Yellow Ink Dispersion (Minimum Pigment content 31%) | 1 kg | Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) | 0.073 kg |
| Yellow Ink Dispersion (Minimum Pigment content 31%) | 1 kg | Linseed Alkyd Resin (100% Solid) | 0.052 kg |
| Yellow Ink Dispersion (Minimum Pigment content 31%) | 1 kg | Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) | 0.598 kg |
| Green Ink Dispersion (Minimum Pigment content 40.5%) | 1 kg | Pigment (Phthalo Green) | 0.417 lg |
| Green Ink Dispersion (Minimum Pigment content 40.5%) | 1 kg | Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) | 0.115 kg |
| Green Ink Dispersion (Minimum Pigment content 40.5%) | 1 kg | Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) | 0.509 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) | 1 kg | Ortho-Para Toluene Sulphonamide/ Toluene Sulphonamide (OTPT/ PTS Amide) | 0.322 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) | 1 kg | Melamine | 0.090 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) | 1 kg | Formaldehyde | 0.140 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) | 1 kg | Optical Brightner | 0.001 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) | 1 kg | Solvent Dyes | 0.028 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) | 1 kg | Ortho-Para Toluene Sulphonamide/ Toluene Sulphonamide (OTPT/PTS Amide) | 0.322 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) | 1 kg | Melamine | 0.079 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) | 1 kg | Formaldehyde | 0.127 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) | 1 kg | Optical Brightner | 0.001 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) | 1 kg | Basic Dyes | 0.031 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) | 1 kg | Solvent Dyes | 0.001 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) | 1 kg | Ortho-Para Toluene Sulphonamide/ Toluene Sulphonamide (OTPT/PTS Amide) | 0.322 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) | 1 kg | Melamine | 0.079 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) | 1 kg | Formaldehyde | 0.122 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) | 1 kg | Optical Brightner | 0.001 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) | 1 kg | Basic Dyes | 0.012 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) | 1 kg | Solvent Dyes | 0.043 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) | 1 kg | Ortho-Para Toluene Sulphonamide/ Toluene Sulphonamide (OTPT/ PTS Amide) | 0.322 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) | 1 kg | Melamine | 0.079 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) | 1 kg | Formaldehyde | 0.122 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) | 1 kg | Optical Brightner | 0.001 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) | 1 kg | Basic Dyes | 0.023 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) | 1 kg | Solvent Dyes | 0.001 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% | 1 kg | 2-Ethylhexyl-4-(dimenthlamino) benzote | 0.193 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% | 1 kg | Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone | 0.153 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% | 1 kg | Benzil Dimethyl Ketal | 0.285 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% | 1 kg | Ethyl Michlers Ketone or 4,4-bis (Diethylamino) benzophenone | 0.285 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% | 1 kg | 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One | 0.102 kg |
| Ink Flow Improver containing minimum 95% Texanol Isobutyrate | 1 kg | Petroleum Distillate ( 240-230 Degree Celsius) | 0.051 kg |
| Ink Flow Improver containing minimum 95% Texanol Isobutyrate | 1 kg | Texanol Isobutyrate | 0.969 kg |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Petroleum Distillate (Distillation Range 240-330 Degree C | 34.800 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Bis-Phenol-A | 0.200 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Butylated Hydroxy Toluene | 0.50 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Di-Cyclopentadiene | 20.480 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Slyvablend FA 7002/Dimer Acid | 0.450 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Fumaric Acid | 3.350 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Glycerine | 0.006 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Isophthalic Acid | 2.000 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Light Magnesium Oxide | 0.011 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Neodene | 2.600 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Nonyl Phenol | 13.200 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Oxyaluminium Octoate | 0.500 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Tertiary Butyl Catechol | 0.010 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Tertiary Butyl Phenol (PTBP) | 0.450 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Paraformaldehyde | 2.200 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Pentaery thritol | 3.050 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Refined Linseed Oil | 8.800 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Rosin | 13.800 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Texanol Isobutyrate | 8.100 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Tri Phenyl Phosphite | 0.012 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) | 100 kg | Trimethylol Propane | 0.700 kgs |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) | 1 kg | Relevant Alkyd Resin namely Soya Long Oil Alkyd resin of 70% Oil length having Solid content 100% /Linseed Oil Based Alkyd resin (Long Oil Length) | 0.105 kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) | 1 kg | Soya Bean Oil | 0.051 kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) | 1 kg | Petroleum Distillate (Distillation Range 240-330 Degree Centigrade) | 0.402 kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) | 1 kg | Phenol Modified Rosin Ester / Rosin Modified Phenolic Resin (Technical Specification in Acid Values 25 max softening Point (R&B) 110 Degree - 120 Degree Centigrade) | 0.367kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) | 1 kg | Structed Phenolic Modified Rosin Ester | 0.108 kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) | 1 kg | Aluminium Chelate | 0.010 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) | 1 kg | O - Toluene Sulphonamide / P-Toluene Sulphonamide (OTPT/PTS Amide) | 0.350 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) | 1 kg | Melamine | 0.087 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) | 1 kg | Formaldehyde | 0.132 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) | 1 kg | Optical Brightener | 0.001 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) | 1 kg | Solvent dyes | 0.034 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) | 1 kg | O - Toluene Sulphonamide / P-Toluene Sulphonamide (OTPT/PTS Amide) | 0.350 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) | 1 kg | Melamine | 0.087 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) | 1 kg | Formaldehyde | 0.132 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) | 1 kg | Optical Brightener | 0.001 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) | 1 kg | Solvent Dyes | 0.068 kg |
| Fluorescent Ink Concentrate BLUE IV - Invisible Euroblue (Amino Sulphonamide Based matrix content 48%) | 1 kg | O - Toluene Sulphonamide / P-Toluene Sulphonamide (OTPT/PTS Amide) | 0.365 kg |
| Fluorescent Ink Concentrate BLUE IV - Invisible Euroblue (Amino Sulphonamide Based matrix content 48%) | 1 kg | Melamine | 0.089 kg |
| Fluorescent Ink Concentrate BLUE IV - Invisible Euroblue (Amino Sulphonamide Based matrix content 48%) | 1 kg | Formaldehyde | 0.126 kg |
| Fluorescent Ink Concentrate BLUE IV - Invisible Euroblue (Amino Sulphonamide Based matrix content 48%) | 1 kg | Optical Brightener | 0.054 kg |
| S.No | Country Name | Shipment Value (Currency) | Total Buyers | |
| No records found | ||||
Get the latest resources, news and more...
By clicking "sign up" you agree to receive emails from The Dollar Business and accept our web terms of use and privacy and cookie policy.
Copyright @2024 The Dollar Business. All rights reserved.
Your Cookie Controls: This site uses cookies to improve user experience, and may offer tailored advertising and enable social media sharing. Wherever needed by applicable law, we will obtain your consent before we place any cookies on your device that are not strictly necessary for the functioning of our website. By clicking "Accept All Cookies", you agree to our use of cookies and acknowledge that you have read this website's updated Terms & Conditions, Disclaimer, Privacy and other policies, and agree to all of them.
