STRUCTURES (EXCLUDINGPREFABRICATED BUILDINGS OFHEADING 9406) AND PARTS OFSTRUCTURES (FOR EXAMPLE, BRIDGESAND BRIDGE-SECTIONS, LOCK-GATES,TOWERS, LATTICE MASTS, ROOFS,ROOFING FRAMEWORKS, DOORS ANDWINDOWS AND THEIR FRAMES ANDTHRESHOLDS FOR DOORS, SHUTTERS,BALUSTRADES, PILLARS ANDCOLUMNS), OF IRON OR STEEL; PLATES, RODS, ANGLES, SHAPES, SECTIONS, TUBES AND THE LIKE,PREPARED FOR USE IN STRUCTURES OF IRON OR STEEL.
HS codes falls under this category.
| HS Codes | Duty Drawback | Unit | Drawback Rate | Drawback cap per unit in Rs. |
| 73089010 | Duty Drawback | - | 1.8 | - |
| 73089020 | Duty Drawback | - | 1.8 | - |
| 73089030 | Duty Drawback | - | 1.8 | - |
| 73089040 | Duty Drawback | - | 1.8 | - |
| 73089050 | Duty Drawback | - | 1.8 | - |
| 73089060 | Duty Drawback | - | 1.8 | - |
| 73089070 | Duty Drawback | - | 1.8 | - |
| 73089090 | Duty Drawback | - | 1.8 | - |
PLEASE NOTE: TOTAL INCENTIVE EQUALS SUM OF MEIS AND DUTY DRAWBACK.FOR INSTANCE, FOR Other FALLING UNDER HS CODE: 150290 INCENTIVES FROM THE GOVERNMENT IS 0.15%.
| HS Codes | Product Description | Reward under MEIS |
| 73089010 | Other:Beams, channels, pillars and girders prepared for use in structures | - |
| 73089020 | Other:Drop rods | - |
| 73089030 | Other:Hatchway, rails and bulkheads for ships or boats and parts of hull | - |
| 73089040 | Other:Galvanised tension bars | - |
| 73089050 | Other:Structures and super structures for mining | - |
| 73089060 | Other:Truss rods | - |
| 73089070 | Other:Tubular steel poles for electric transmission and distribution lines | - |
| 73089090 | Other | - |
| Export Item | Quantity | Import Item | Qty Allowed. |
| PCB Single Side | 100 SQ. MTR. | Drilling: | |
| PCB Single Side | 100 SQ. MTR. | (A) Copper Clad Laminates | 130.00 sq.mtrs |
| PCB Single Side | 100 SQ. MTR. | (B) Entry Sheet | 43.00 sq.mtrs. |
| PCB Single Side | 100 SQ. MTR. | (C) Back-Up Sheet | 23.00 sq.mtrs |
| PCB Single Side | 100 SQ. MTR. | (D) PCB Micro Drill Bits | 116 nos. |
| PCB Single Side | 100 SQ. MTR. | (E) Router Bits | 30 nos. |
| PCB Single Side | 100 SQ. MTR. | (F) V-Groove Cutters | 2 nos. |
| PCB Single Side | 100 SQ. MTR. | Acid Etchant Chemicals | 38.15 kg/ltr. |
| PCB Single Side | 100 SQ. MTR. | Imaging/Photo Printing: | |
| PCB Single Side | 100 SQ. MTR. | (A) Ortho/Lithographic Film | 3.00 sq.mtr |
| PCB Single Side | 100 SQ. MTR. | (B) Diazo Film | 25.00 sq.mtr |
| PCB Single Side | 100 SQ. MTR. | Hot Air Levelling (Solder Coating): | |
| PCB Single Side | 100 SQ. MTR. | (A) Solder | 15.00 kg |
| PCB Single Side | 100 SQ. MTR. | (B) Hal Masking Tape/Peelable Solder Mask | 32.50 mtr. |
| PCB Single Side | 100 SQ. MTR. | (C) Flux | 42.50 ltr. |
| PCB Single Side | 100 SQ. MTR. | (A) Screen Printing Ink (For Image Transfer) | 2.00 ltr. |
| PCB Single Side | 100 SQ. MTR. | (B) Legend Printing Ink | 2.00 kgs |
| PCB Single Side | 100 SQ. MTR. | (C) Solder Mask Ink/Catalyst/ Hardner OR | 12.50 kgs |
| PCB Single Side | 100 SQ. MTR. | Dry Film Mask Solder | 100.00 sq.mtr. |
| PCB Single Side | 100 SQ. MTR. | (D) Conductive Ink with Solvent/ Catalyst | 2.00 kg |
| PCB Single Side | 100 SQ. MTR. | (E) Polyester Bolting Cloth | 3.00 mtr. |
| PCB Single Side | 100 SQ. MTR. | (F) Stencil Film | 2.00 mtr. |
| Frame Pipe Set of 4 (Weight: 1398 gms for item 1 ) | 1 set | CRCA/HR Sheet/Coil (seconds/defective) | 1482 gms |
| Painted Slotted Angles | 1 MT | Hot Rolled/Cold Rolled Carbon Steel Coils/Sheets/Plates | 1.20 MT/MT content in export |
| Painted Slotted Angles | 1 MT | Paint/Primer Top Coat and Backer OR | 69 Ltrs |
| Painted Slotted Angles | 1 MT | Epoxy Powder | Upto 4% of FOB value of Exports |
| Aruvil Double Wheel Carrier kit Set (Galvanised) | 1 kg. | Mild Steel HR Sheets/ Strips/ Coils | 0.551 kg |
| Aruvil Double Wheel Carrier kit Set (Galvanised) | 1 kg. | Mild Steel CR Sheets/ Strips/ Coils | 0.157 kg |
| Aruvil Double Wheel Carrier kit Set (Galvanised) | 1 kg. | Zinc | 0.040 kg |
| Barb Arm (Galvanised) | 1 kg. | Hot Rolled MS Sheet/ Strips/ Coils | 1.15 kg |
| Barb Arm (Galvanised) | 1 kg. | Zinc OR | 0.040 kg |
| Barb Arm (Galvanised) | 1 kg. | G.P. Sheet/Strips/Coils | 1.15 kg |
| Barb Arm Base | 1 kg. | Pig Iron | 0.970 kg |
| Barb Arm Base | 1 kg. | Zinc | 0.030 kg |
| Boulevard Clamp (Galvanised) | 1 kg. | Hot Rolled MS Sheet/ Strips/ Coils | 1.01 kg |
| Boulevard Clamp (Galvanised) | 1 kg. | Zinc | 0.040 kg |
| Brace Band (Galvanised) | 1 kg. | Hot Rolled MS Sheet/ Strips/ Coils | 0.993 kg |
| Brace Band (Galvanised) | 1 kg. | Zinc | 0.040 kg |
| Bull Dog Hinge | 1 kg. | Mild Steel HR Sheets/ Strips/ Coils | 0.602 kg |
| Bull Dog Hinge | 1 kg. | Mild Steel Rounds | 0.569 kg |
| Bull Dog Hinge | 1 kg. | Zinc | 0.040 kg |
| Cantilever Gate Roller (Galvanised) | 1 No. | Non-Alloy Steel Round/ Billets | 1.320 kg |
| Cantilever Gate Roller (Galvanised) | 1 No. | Mild Steel HR Sheet/Strips/Coil | 1.10 kg/kg content in export |
| Cantilever Gate Roller (Galvanised) | 1 No. | Mild Steel Rounds | 1.05 kg/kg content in export |
| Cantilever Gate Roller (Galvanised) | 1 No. | Pig Iron | 1.10 kg/kg content in export |
| Cantilever Gate Roller (Galvanised) | 1 No. | Zinc | Upto 2% of weight of export |
| Cantilever Gate Roller (Galvanised) | 1 No. | Bearing | Net to Net |
| Double Carrier Wheel | 1 kg. | Mild Steel HR Sheets/ Strips/ Coil | 0.348 kg |
| Double Carrier Wheel | 1 kg. | Mild Steel CR Sheets/ Strips/ Coils | 0.135 kg |
| Double Carrier Wheel | 1 kg. | MS Rounds | 0.170 kg |
| Double Carrier Wheel | 1 kg. | Natural Rubber | 0.477 kg |
| Double Carrier Wheel | 1 kg. | Zinc | 0.045 kg |
| Fabricated Steel Hardware/ Structure/Articles not elsewhere specified made out of Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips | 1 kg | Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips | 1.05 kg/kg content in export product |
| Fabricated Steel Hardware/ Structure/Articles not elsewhere specified made out of Non Alloy/Alloy/ Stainless Steel Plates/Sheets/Wide Coils/Strips | 1 kg | Zinc Ingot (to be allowed only in case the product is Galvanised) | 1.04 kg/kg content in export product |
| Floor Flange | 1 kg. | Pig Iron | 0.970 kg |
| Floor Flange | 1 kg. | Zinc | 0.030 kg |
| Gate Clip | 1 kg. | Hot Rolled MS Sheet/ Strips/ Coils | 0.998 kg |
| Gate Clip | 1 kg. | Zinc | 0.065 kg |
| ILD Fork | 1 kg. | Mild Steel HR Sheets/ Strips/ Coils | 0.918 kg |
| ILD Fork | 1 kg. | Mild Steel Rounds | 0.120 kg |
| ILD Fork | 1 kg. | Zinc | 0.050 kg |
| Loop cap | 1 kg. | Cold Rolled MS Sheets/ Strips/ Coils | 1.069 kg |
| Loop cap | 1 kg. | Zinc | 0.115 kg |
| Loop Cap | 1 kg. | Pig Iron | 0.970 kg |
| Loop Cap | 1 kg. | Zinc | 0.030 kg |
| M.S. Fish Plate | 1 Pair | M.S. Billets | 1.12 kg/kg content in the export product. |
| Male Bracket | 1 kg. | Mild Steel HR Sheets/ Strips/ Coils | 0.674 kg |
| Male Bracket | 1 kg. | Mild Steel Rounds | 0.390 kg |
| Male Bracket | 1 kg. | Zinc | 0.040 kg |
| Offset Rail End | 1 kg. | Cold Rolled MS Sheet/ Strips/ Coils | 0.884 kg |
| Offset Rail End | 1 kg. | MS Plate | 0.354 kg |
| Offset Rail End | 1 kg. | Zinc | 0.042 kg |
| Perforated Construction Stakes (Round /Flat/ Square) | 1 MT | Non-Alloy Steel Billets / Ingot / Blooms / Slabs OR | 1.10 MT/MT content in the export product. |
| Perforated Construction Stakes (Round /Flat/ Square) | 1 MT | Non-Alloy Steel Bars & Rods (Round / Flat / Square including in coil form)/ Wire Rods | 1.05 MT/MT content in the export product |
| Pole Line Hardware Fittings & Accessories (Galvanised) | 1 MT | High Tensile Steel and Mild Steel Billets/Angles/Plates | 1.05 MT |
| Pole Line Hardware Fittings & Accessories (Galvanised) | 1 MT | Unwrought Zinc | 0.05 MT |
| Post Cap | 1 kg. | Cold Rolled MS Sheets Strips/ Coils | 1.033 kg |
| Post Cap | 1 kg. | Zinc | 0.115 kg |
| Post Cap | 1 kg. | Pig Iron | 0.970 kg |
| Post Cap | 1 kg. | Zinc | 0.030 kg |
| Rail End | 1 kg. | Cold Rolled MS Sheet/ Strips/ Coils | 0.884 kg |
| Rail End | 1 kg. | MS Plate | 0.354 kg |
| Rail End | 1 kg. | Zinc | 0.042 kg |
| Scrool | 1 kg. | Hot Rolled MS Sheet/ Strips/ Coils | 1.018 kg |
| Scrool | 1 kg. | Zinc | 0.075 kg |
| Steel Truss Tightner - Galvanised | 1 MT | HR Coils/Sheets | 1.05 MT/MT content in export. |
| Steel Truss Tightner - Galvanised | 1 MT | Zinc | 4% of Net weight of steel gal- vanised. |
| Tension Band | 1 kg. | Hot Rolled MS Sheet/ Strips/ Coils | 0.993 kg |
| Tension Band | 1 kg. | Zinc | 0.075 kg |
| Track Wheel | 1 kg. | Mild Steel HR Sheets/ Strips/ Coils | 0.695 kg |
| Track Wheel | 1 kg. | Mild Steel Rounds | 0.306 kg |
| Track Wheel | 1 kg. | Zinc | 0.040 kg |
| Vertical Arm | 1 kg. | Hot Rolled MS Sheet/ Strips/ Coils | 1.219 kg |
| Vertical Arm | 1 kg. | Zinc | 0.085 kg |
| Steel Fence post | 1 kg | Wire Rods | 1.05 kg/kg content in the export product |
| Steel Fence post | 1 kg | Hot Rolled Coils | 1.05 kg/kg content in the export product |
| Plates for Lead Acid Storage Battery | 1 No. | Pure Lead | 1.02 kg/kg content in the export product |
| Plates for Lead Acid Storage Battery | 1 No. | Antimonial Lead Alloy of relevant grade | 1.02 kg/kg content in the export product |
| Plates for Lead Acid Storage Battery | 1 No. | Fibre (CA Flock) | Net to Net |
| Plates for Lead Acid Storage Battery | 1 No. | Vanislperse (Lignin) | 1.04 kg/kg content in the export product |
| Plates for Lead Acid Storage Battery | 1 No. | Tubular Bags | Net to net. |
| Plates for Lead Acid Storage Battery | 1 No. | Cork Powder | Net to net. |
| Spring Casing for Pipe Line support | 1Kg | M S Plate/Sheet | 1.15Kg/Kg content in the export product |
| Fabricated Articles made of SS not elsewhere specified | 1 kg | SS Sheet/ Wide Coil/ Strips of relevant grade | 1.05 kg |
| Fabricated Steel Hardware/ Structure/ Articles not elsewhere specified made out of MS CR Plates/ Sheets/ Coils/ Strips | 1. Kg | MS CR Sheets/ Coils/ Strips | 1.05 kg/kg content in export product |
| Fabricated Steel Hardware/ Structure/ Articles not elsewhere specified made out of MS CR Plates/ Sheets/ Coils/ Strips | 1. Kg | Zinc Ingot (to be allowed only in case the export product is galvanized | 0.05 kg |
| Self Supporting Aerial Telephone Cable of relevant size (pairs) having Copper Conductor 0.4 mm dia | 1 km | As per Engineering Table No. 9 (6) | |
| Self Supporting Aerial Telephone Cable of relevant size (pairs) having Copper Conductor 0.5 mm dia | 1 km | As per Engineering Table No. 9 (7) | |
| Self Supporting Aerial Telephone Cable of relevant size (pairs) having Copper Conductor 0.65 mm dia | 1 km | As per Engineering Table No. 9 (8) |
| S.No | Country Name | Shipment Value (Currency) | Total Buyers | |
| No records found | ||||
Get the latest resources, news and more...
By clicking "sign up" you agree to receive emails from The Dollar Business and accept our web terms of use and privacy and cookie policy.
Copyright @2024 The Dollar Business. All rights reserved.
Your Cookie Controls: This site uses cookies to improve user experience, and may offer tailored advertising and enable social media sharing. Wherever needed by applicable law, we will obtain your consent before we place any cookies on your device that are not strictly necessary for the functioning of our website. By clicking "Accept All Cookies", you agree to our use of cookies and acknowledge that you have read this website's updated Terms & Conditions, Disclaimer, Privacy and other policies, and agree to all of them.
Ready to find out more? We're here to help.
Still confused? Learn more here
Ready to find out more? We're here to help.
