| HS Codes | Duty Drawback | Unit | Drawback Rate | Drawback cap per unit in Rs. |
| 732611 | Duty Drawback | - | - | - |
| 732619 | Duty Drawback | - | - | - |
| 732620 | Duty Drawback | - | - | - |
| 732690 | Duty Drawback | - | - | - |
PLEASE NOTE: TOTAL INCENTIVE EQUALS SUM OF MEIS AND DUTY DRAWBACK.FOR INSTANCE, FOR Other FALLING UNDER HS CODE: 150290 INCENTIVES FROM THE GOVERNMENT IS 0.15%.
| HS Codes | Product Description | Reward under MEIS |
| 732611 | Forged or stamped, but not further worked:Grinding balls and similar articles for mills | - |
| 732619 | OTHER ARTICLES OF IRON OR STEEL | - |
| 732620 | OTHER ARTICLES OF IRON OR STEEL | - |
| 732690 | OTHER ARTICLES OF IRON OR STEEL | - |
| Export Item | Quantity | Import Item | Qty Allowed. |
| EPNS Wares | 1 kg | Brass Ingots OR | 1.125 kgs |
| EPNS Wares | 1 kg | Brass Scrap | 1.155 kgs |
| Hand Tuffted Acrylic Carpet | 1 Sq.Mtr . | Acrylic Fibre | 1.05 kg/kg content in export product. |
| Hand Tuffted Acrylic Carpet | 1 Sq.Mtr . | Cationic Dyes of 100% Strength | 0.02 kg/kg of Acrylic Fibre content in export product. |
| Anti Vibration Pads (Ribbed Rubber + + Ribbed Rubber) | 1 Kg | Synthetic Rubber (Nitrile) | 0.300 Kg. |
| Anti Vibration Pads (Ribbed Rubber + + Ribbed Rubber) | 1 Kg | Rubber Chemicals(Accelerators, Anti oxidents, retarders) | 0.012 Kg. |
| Anti Vibration Pads (Ribbed Rubber + + Ribbed Rubber) | 1 Kg | 0.300 Kg. | |
| Nickel Silver Zips | 1 kg. | Nickel Silver Alloy | 1.06 kg./kg. content in export. |
| Nickel Silver Zips | 1 kg. | Polyester Yarn | 1.05 kg./kg. content in export. 1 |
| Nickel Silver Zips | 1 kg. | Relevant Dyes | 2.50% of the weight of Item no. 2 |
| Nickel Silver Zips | 1 kg. | Sliders & End Parts | Actual Content + 1% Wastage |
| Plastic Hand Gloves made from HDPE/LDPE/EVA | 1 kg | Relevant HDPE/LDPE/EVA | 1.15 kg |
| CRT Data Display Monitor (Colour CGA) | 1 No | High voltage silicon transistor | 13 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Transistor high frequency | 4 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | ICs | 4 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Diodes | 30 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | High Power resistors | 20 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Resistors | 100 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | H.V. Capacitors | 12 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Capacitors | 50 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Inductors | 12 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Transformer high voltage | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Transformer | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | PCBs (Unpopulated) | 3 Nos |
| CRT Data Display Monitor (Colour CGA) | 1 No | Picture tube | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Yoke | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Plastic cabinet | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Metal Housing set | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Cable connector set | 10 Nos. |
| CRT Data Display Monitor (Colour CGA) | 1 No | CRT back female connector | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Spark gap | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | On/off Switch | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | LED | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Line filter | 1 No. |
| CRT Data Display Monitor (Colour CGA) | 1 No | Nut/ Bolt | 1 No. |
| Yellow Iron Oxide | 1 kg | Ferrous Sulphate Hepthydrate | 1.650 kg |
| Yellow Iron Oxide | 1 kg | Iron Powder | 0.428 kg |
| Yellow Iron Oxide | 1 kg | Caustic Soda | 0.450 kg |
| Yellow Iron Oxide | 1 kg | Furnace Oil OR Coal | 0.682 kg 1.400 kg |
| Thrust housing made of Steel. | 1.0 kg | Non-Alloy Steel rounds/HR Sheet/Plate | 1.10 kg/Kg content in the export product. |
| Bronze utensils | 1 kg | Bronze scrap | 1.030 kg |
| Cable Ties made of Stainless Steel | 1 kg | Stainless Steel Strips /Coils of AISI 304Grade | 1.25 Kg |
| CLEVIS | 1 kg | MS Flats/Plates | 1.100 kg/kg content in export. |
| Gate Hold Back | 1 kg. | Hot Rolled MS Sheet/ Strips/ Coils | 1.223 kg |
| Gate Hold Back | 1 kg. | Zinc | 0.060 kg |
| Mild Steel Hollow Rivets | 1 kg | Mild Steel Wire/Wire Rods | 1.2 kg |
| Mild Steel Rivets | 1 kg | Mild Steel Wire/Wire Rods | 1.06 kg |
| M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated | 1 kg | M.S. Wire Rod | 1.05 kg. |
| M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated | 1 kg | Nickel OR | 0.97% of weight of Steel to be Nickel Plated. OR |
| M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated | 1 kg | Zinc OR | 0.97% of weight of Steel to be Zinc Plated. OR |
| M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated | 1 kg | Copper OR | 0.97% of weight of Steel to be Copper Plated. OR |
| M.S. Bucket Handle Duly plated with nickel or Copper or Zinc/Powder Paint Coated | 1 kg | Powder Paint | 0.97% of weight of Steel to be Powder Painted |
| Forged Crankshaft Fully machined (Made of Alloy/Non-Alloy Steel) | 1 No. with specified weight | Alloy/Non-Alloy Steel bars/Rods/Billets/Blooms/Ingots (only relevant steel required is to be allowed i.e. against Alloy Steel product, Alloy Steel and against Non-Alloy Steel product, only Non-Alloy Steel isto be allowed | 1.84 kg/kg content in export product |
| Forged Crankshaft Fully machined (Made of Alloy/Non-Alloy Steel) | 1 No. with specified weight | Misc. items: Rectangular Die Steel Blocks and Die Steel Rounds, Consumables including consumable tools | 4 % of FOB Value. |
| Forged Crankshaft Fully machined (Made of Alloy/Non-Alloy Steel) | 1 No. with specified weight | Furnace Oil | 0.5 KL/MT of export |
| Nickel Silver Strip for Defence, Electronics and telecommunication purposes | 1 Kg | Nickel Silver Scrap OR | 1.090 Kg/kg content in export product |
| Nickel Silver Strip for Defence, Electronics and telecommunication purposes | 1 Kg | Copper Wire Bar/ Cathode/ Ingot/ Rod OR Copper Scrap | 1.064 kg/kg content in the export product OR 1.075Kg/Kg content in the export product. |
| Nickel Silver Strip for Defence, Electronics and telecommunication purposes | 1 Kg | Zinc Ingot | 1.064 kg/kg content in the export product |
| Nickel Silver Strip for Defence, Electronics and telecommunication purposes | 1 Kg | Nickel Cathode | 1.064 kg/kg content in the export product |
| Nickel Silver Strip for Defence, Electronics and telecommunication purposes | 1 Kg | Zinc Ingots | 1.05 Kg/kg content in export product |
| Nickel Silver Strip for Defence, Electronics and telecommunication purposes | 1 Kg | Nickel Cathode | 1.05 Kg/kg content in export product |
| Nickel Silver Wire | 1 Kg | Copper Wire Bar/ Cathode/Ingot/Rod OR Copper Scrap | 1.05 Kg/Kg content in export OR 1.075Kg/Kg content in the export product. |
| Nickel Silver Wire | 1 Kg | Zinc Ingot | 1.05 Kg/Kg content in export |
| Nickel Silver Wire | 1 Kg | Nickel Cathode | 1.05 Kg/Kg content in export |
| Silver Nickel Contacts | 1 Kg | Silver Bullion Purity 99.9 % | 1.03 kg/kg content in export |
| Silver Nickel Contacts | 1 Kg | Nickel 99.8% purity | 1.05 kg/kg content in export |
| Steel Cable Drum in various sizes | 1 Kg. | CRCA Non Alloy Steel Sheet/ Coil | 1.05 kg/kg content in the export product |
| Steel Cable Drum in various sizes | 1 Kg. | H.R. Non Alloy Steel Sheet/ Coil | 1.03 kg/kg content in the export product |
| Steel Cable Drum in various sizes | 1 Kg. | Non Alloy Steel Round Bar | 1.02 kg/kg content in the export product |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel/ Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified | 1 kg. | Forging Quality/ Alloy Steel/ Stainless Steel Bars/ Rods/ Billets/ Blooms/ Ingots (Relevant Material) | 1.60 kg/kg content in export. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel/ Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified | 1 kg. | Chemicals: Rust Preventing Oil/Primer Paints | 2% of the FOB value of exports. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel/ Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified | 1 kg. | Misc. Items: Refractory material, Die Steel/ Die Blocks Cutting Tools, Cutters, Sawing Blades including bimetallic Bandsaw blades steel shots, fuel oil, heat treatment chemicals, quenching oil and lubricants. | 4% of the FOB value of exports |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through casting process, not elsewhere specified | 1 kg | Pig Iron | 1.25 kg. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Major Raw materials comprising of Carbon Steel/ Non-Alloy Steel Melting Scrap | 1700 kgs. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Additives comprising of: | 50 kgs. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | a) Core Wire/ Scrap/ Ingots/ Shots of Aluminium b) Core Wire/ Lumps Powder of Calcium Silicide (CaSi) c) Lumps/ Powder of Misch Metall d) Ferro Silicon e) Ferro Manganese | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Miscellaneous items: | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | i)Resin Coated Sand ii) Organic binders | 450 kgs 200 kgs. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | i) Graphite electrode ii)Welding Electrode iii) Mould Wash/ Mould coat iv) Grinding Wheel v) Refractories: | 7.5 kgs 12.5 kgs 31 kgs 6kgs 37.5 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | a) Porous Plugs/ Seat Blocks/ Sleevers/ Slide Gate Plates b) Direct Bonded Basic Bricks c) Monolithic/ Gunning/ Ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | vi) Industrial X-Ray Film (Various Grades for Gamma Rays Iridium 192 & Cobalt 60) | 9440 Sq. Cm. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Furnace Oil/ Diesel Oil for i) Ladle heating ii) Moulding Heating iii) Heat Treatment | 265 Ltrs. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Major Raw Materials comprising of: | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Non-Alloy Steel Melting Scrap | 1594 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Ferro Alloys comprising of: i) Charge Ferro Nickel/ Nickel Oxide Sinter OR | 75 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Nickel ii) Ferro Chrome iii) Ferro Manganese iv)Ferro Molybdenum v) Ferro Silicon | 30 kgs 21 kgs 25 kgs 31 kgs 25 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Additives comprising of: a) Core wire/ Scrap/ Ingots/ shots of Aluminium b) Calcium silicide (CaSi) c) Selenium d) Lumps/ Powder of Misch Metal | 6 kg |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Miscellaneous items | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | i) Resin coated Sand ii) Organic binders | 450 kgs 200 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | i) Graphite Electrode ii) Welding electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel v) Refractories | 7.5 kgs. 12.5 kgs 31 kgs 6 kgs 37.5 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | a) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates b) Direct Bonded Basic Bricks c) Monolithic/ Gunning/ Ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | vi) Industrial X-Ray Film (various Grades for Gamma Rays Iridium 192 & Cobalt 60) | 9440 Sq. Cm. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy Steel (other than Stainless Steel) (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Furnace Oil/ Diesel Oil for i) Ladle Heating ii) Mould Heating iii) Heat treatment | 265 Ltrs. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Major Raw Materials comprising of: | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Stainless Steel Melting Scrap | 862.5 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Iron Flakes/ Pure Iron/ Iron Powder | 387.5 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | i) Ferro Chrome ii)Charge Nickel Oxide Sinter/ Ferro Nickel OR | 400 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | c)i) Ferro Chrome ii)Nickel iii) Ferro Manganese iv)Ferro Molybdenum v) Ferro Silicon | 87.5 kgs 125.0 kgs 12.5 kgs 62.5 kgs 25 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Additives comprising of : a) Core wire/ Scrap/ Ingots/ Shots of Aluminium b)Core wire/ Ingots/ powder of CalciumSilicide(CaSi) c) Selenium d) Lumps/ Powder of Misch Metal | 6.25 kgs. |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Miscellaneous items: | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | i) Resin coated Sand ii)Organic binders | 1562.5 kgs 200 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | i) Graphite Electrode ii) Welding electrode iii) Mould Wash/ Mould Coat iv) Grinding Wheel v) Refractories | 7.5 kgs 12.5 kgs 31.25 kgs 6.25 kgs 37.5 kgs |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | a) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates b) Direct Bonded Basis Bricks c)Monolithic/ Gunning/ ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks | |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | vi) Industrial X-Ray Film (various Grades for Gamma Rays Iridium 192 & Cobalt 60) | 9440 sq. cm |
| Identifiable ready to use machined parts/ components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified | 1 MT | Furnace Oil/ Diesel Oil for i) Ladle Heating ii) Mould Heating iii) Heat Treatment | 265 Ltr. |
| S.No | Country Name | Shipment Value (Currency) | Total Buyers | |
| No records found | ||||
Get the latest resources, news and more...
By clicking "sign up" you agree to receive emails from The Dollar Business and accept our web terms of use and privacy and cookie policy.
Copyright @2024 The Dollar Business. All rights reserved.
Your Cookie Controls: This site uses cookies to improve user experience, and may offer tailored advertising and enable social media sharing. Wherever needed by applicable law, we will obtain your consent before we place any cookies on your device that are not strictly necessary for the functioning of our website. By clicking "Accept All Cookies", you agree to our use of cookies and acknowledge that you have read this website's updated Terms & Conditions, Disclaimer, Privacy and other policies, and agree to all of them.
