HS Code of 8511 (ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES)

Description:

ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES.

HS codes falls under this category.

851110 851120 851130 851140 851150 851180 851190

Incentives of 8511 (ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES)

HS Codes	Duty Drawback	Unit	Drawback Rate	Drawback cap per unit in Rs.
851110	Duty Drawback		1.7
851120	Duty Drawback		1.7
851130	Duty Drawback		1.7
851140	Duty Drawback		1.7
851150	Duty Drawback		1.7
851180	Duty Drawback		1.7
851190	Duty Drawback		1.7

REWARD UNDER MERCHANDISE EXPORTS FROM India SCHEME (MEIS) [AS % ON FOB VALUE OF EXPORTS]

PLEASE NOTE: TOTAL INCENTIVE EQUALS SUM OF MEIS AND DUTY DRAWBACK.FOR INSTANCE, FOR Other FALLING UNDER HS CODE: 150290 INCENTIVES FROM THE GOVERNMENT IS 0.15%.

HS Codes	Product Description	Reward under MEIS
851110	Sparking plugs	-
851120	ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES	-
851130	ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES	-
851140	Starter motors and dual purpose startergenerators	-
851150	Other generators	-
851180	ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES	-
851190	Parts	-

Standard Input Output Norms of 8511 (ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES)

Product Details

Export Item	Quantity	Import Item	Qty Allowed.
Starter Motor Armature for High Speed Vehicles Cars etc.	1 No.	Copper Electrolytic Grade Standard Wire/ Bar/Rod/Ingots	0.900 kg
		Starter Motor Armature for High Speed Vehicles Cars etc.	1 No.	CRNGO Steel Sheet/ Coil 0.5 to 1.0 mm thickness	1.600 kgs
				Starter Motor Armature for High Speed Vehicles Cars etc.	1 No.	Soldering Wire/ Billet	0.025 kg
						Starter Motor Armature for High Speed Vehicles Cars etc.	1 No.	Nomex/Hypertherm F3 Ply, Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent	0.020 kg
Armature for Delcoremy type motor	1 No							Copper electrolytic grade standard wire/ bar/ rod	2 Kg
		Armature for Delcoremy type motor	1 No					CR Steel Sheet extra deep drawing 0.5 to 1 mm thick	6 Kg
				Armature for Delcoremy type motor	1 No			Steel rod free cutting FNIA/SAE-8620 or eqv. 5-36 mm dia	2.3 Kg
						Armature for Delcoremy type motor	1 No	Solder Tin - 80% Lead - 20 %	0.05 Kg
Armature for Dynamo	1 No							Copper electrolytic grade standard wire/ bar/ rod	0.6 Kg
		Armature for Dynamo	1 No					CR Steel Sheet extra deep drawing 0.5 to 1 mm thick	1.6 Kg
				Armature for Dynamo	1 No			Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	0.5 Kg
						Armature for Dynamo	1 No	Solder Tin - 80% Lead - 20 %	0.02 Kg
								Armature for Dynamo	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.02 Kg
CBH Flate for starter motor	1 No									C R Steel sheet extra deep drawing 0.5 to 4 mm thick	0.4 Kg
CBH Flate for starter motor	1 No	CBH Flate for starter motor	1 No							Carbon brush	2 Nos
Field Coil for Starter Motor	1 No	CBH Flate for starter motor	1 No	Copper electrolytic grade standard wire/bar/rod	0.85 Kg
Field Coil for Starter Motor	1 No	Field Coil for Starter Motor	1 No	Solder Tin - 80 Lead - 20%	0.03 Kg
Generator (Dynamo) Assembly	1 No	Field Coil for Starter Motor	1 No	Copper electrolytic grade standard wire/ bar/ rod	1.6 Kg
		Generator (Dynamo) Assembly	1 No	CR Steel Sheet extra deep drawing 0.8 to 1 mm thick	6.5 Kg
				Generator (Dynamo) Assembly	1 No	Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	1.2 Kg
						Generator (Dynamo) Assembly	1 No	Solder Tin - 80% Lead - 20 %	0.03 Kg
								Generator (Dynamo) Assembly	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.03 Kg
										Generator (Dynamo) Assembly	1 No	Carbon brush	2 No
												Generator (Dynamo) Assembly	1 No	Ball Bearings	2 No
Ignition Coil oil filled	1 No													Copper Wire enamelled 22 to 46 SWG	0.13 Kg
		Ignition Coil oil filled	1 No											Insulating Kraft paper electrical grade	0.02 Kg
				Ignition Coil oil filled	1 No									Silicon steel sheet 0.5 to 1 mm thick	0.3 Kg
Ignition Coil Resin Cost	1 No.					Copper electrolytic grade standard wire/ rod/ ingots	0.14 Kg
		Ignition Coil Resin Cost	1 No.			Insulating Kraft paper electrical grade	0.15 Kg
				Ignition Coil Resin Cost	1 No.	Silicon steel sheet 0.5 to 1 mm thick	0.80 Kg
						Ignition Coil Resin Cost	1 No.	Epoxide resin	0.075 Kg
								Ignition Coil Resin Cost	1 No.	Hardner	0.075 Kg
Slip Ring	1 No									Copper electrolytic grade standard wire/ bar/ rod	0.04 Kg
Starter Motor Armature for Low Speed Vehicles	1 No	Copper electrolytic grade standard wire/ bar/ rod	0.8 Kg
		Starter Motor Armature for Low Speed Vehicles	1 No	CR Steel Sheet extra deep drawing 0.5 to 1 mm thick	3.5 Kg
				Starter Motor Armature for Low Speed Vehicles	1 No	Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	1.5 Kg
						Starter Motor Armature for Low Speed Vehicles	1 No	Solder Tin - 80 % Lead - 20 %	0.02 Kg
								Starter Motor Armature for Low Speed Vehicles	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.04 Kg
Starter motor with maximum current 1100 Amps	1 No									Copper electrolytic grade standard wire/ bar/ rod	3.3 Kg
		Starter motor with maximum current 1100 Amps	1 No							CR Steel Sheet extra deep drawing 0.8 to 10 mm thick	13 Kg
				Starter motor with maximum current 1100 Amps	1 No					Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	2.1 Kg
						Starter motor with maximum current 1100 Amps	1 No			Solder Tin - 80 % Lead - 20 % RC 16 SWG	0.03 Kg
								Starter motor with maximum current 1100 Amps	1 No	Carbon brush	4 Nos
										Starter motor with maximum current 1100 Amps	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.06 Kg
Starter motor with maximum current 800 Amps	1 No											Copper electrolytic grade standard wire/ bar/ rod	2.5 Kg
		Starter motor with maximum current 800 Amps	1 No									CR Steel Sheet extra deep drawing 0.8 to 10 mm thick	10 Kg
				Starter motor with maximum current 800 Amps	1 No							Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	2.1 Kg
						Starter motor with maximum current 800 Amps	1 No					Solder Tin - 80 % Lead - 20 % RC 16 SWG	0.03 Kg
								Starter motor with maximum current 800 Amps	1 No			Carbon brush	4 Nos
										Starter motor with maximum current 800 Amps	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.06 Kg
Tungsten Disc alongwith Rod End, Cutting Sludge, Burnishing Sludge, Scrap Disc	1.0 kg containing 0.5 kg.Tungesten Disc.& 0.5 kg. remaining items											Tungsten Rod	1.1 kg
		Tungsten Disc alongwith Rod End, Cutting Sludge, Burnishing Sludge, Scrap Disc	1.0 kg containing 0.5 kg.Tungesten Disc.& 0.5 kg. remaining items									Alumina Oxide Abrasive Cutting Wheels - OD 180 mm, ID 12.7 mm and Thickness 0.42 mm	5 Nos.
Brush Gear Assembly (for automobile starter motor)	1 No.			Carbon Brushes of relevant specification	4 Nos.

TOP BUYING COUNTRIES of 8511 (ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES)

S.No	Country Name	Shipment Value (Currency)	Total Buyers
No records found

Description:

REWARD UNDER MERCHANDISE EXPORTS FROM India SCHEME (MEIS) [AS % ON FOB VALUE OF EXPORTS]

Product Details

We like you just the way you are.