HS-Code Description

HS Code of 8511 (ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES)

Description:

ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES.

HS codes falls under this category.

851110 851120 851130 851140 851150 851180 851190

Incentives of 8511 (ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES)

HS Codes	Duty Drawback	Unit	Drawback Rate	Drawback cap per unit in Rs.
851110	Duty Drawback	-	2	-
851120	Duty Drawback	-	2	-
851130	Duty Drawback	-	2	-
851140	Duty Drawback	-	2	-
851150	Duty Drawback	-	2	-
851180	Duty Drawback	-	2	-
851190	Duty Drawback	-	2	-

REWARD UNDER MERCHANDISE EXPORTS FROM India SCHEME (MEIS) [AS % ON FOB VALUE OF EXPORTS]

PLEASE NOTE: TOTAL INCENTIVE EQUALS SUM OF MEIS AND DUTY DRAWBACK.FOR INSTANCE, FOR Other FALLING UNDER HS CODE: 150290 INCENTIVES FROM THE GOVERNMENT IS 0.15%.

HS Codes	Product Description	Reward under MEIS
851110	Sparking plugs	-
851120	ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES	-
851130	ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES	-
851140	Starter motors and dual purpose startergenerators	-
851150	Other generators	-
851180	ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES	-
851190	Parts	-

Standard Input Output Norms of 8511 (ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES)

Product Details

Export Item	Quantity	Import Item	Qty Allowed.
Starter Motor Armature for High Speed Vehicles Cars etc.	1 No.	Copper Electrolytic Grade Standard Wire/ Bar/Rod/Ingots	0.900 kg
		Starter Motor Armature for High Speed Vehicles Cars etc.	1 No.	CRNGO Steel Sheet/ Coil 0.5 to 1.0 mm thickness	1.600 kgs
				Starter Motor Armature for High Speed Vehicles Cars etc.	1 No.	Soldering Wire/ Billet	0.025 kg
						Starter Motor Armature for High Speed Vehicles Cars etc.	1 No.	Nomex/Hypertherm F3 Ply, Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent	0.020 kg
Armature for Delcoremy type motor	1 No							Copper electrolytic grade standard wire/ bar/ rod	2 Kg
		Armature for Delcoremy type motor	1 No					CR Steel Sheet extra deep drawing 0.5 to 1 mm thick	6 Kg
				Armature for Delcoremy type motor	1 No			Steel rod free cutting FNIA/SAE-8620 or eqv. 5-36 mm dia	2.3 Kg
						Armature for Delcoremy type motor	1 No	Solder Tin - 80% Lead - 20 %	0.05 Kg
Armature for Dynamo	1 No							Copper electrolytic grade standard wire/ bar/ rod	0.6 Kg
		Armature for Dynamo	1 No					CR Steel Sheet extra deep drawing 0.5 to 1 mm thick	1.6 Kg
				Armature for Dynamo	1 No			Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	0.5 Kg
						Armature for Dynamo	1 No	Solder Tin - 80% Lead - 20 %	0.02 Kg
								Armature for Dynamo	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.02 Kg
CBH Flate for starter motor	1 No									C R Steel sheet extra deep drawing 0.5 to 4 mm thick	0.4 Kg
CBH Flate for starter motor	1 No	CBH Flate for starter motor	1 No							Carbon brush	2 Nos
Field Coil for Starter Motor	1 No	CBH Flate for starter motor	1 No	Copper electrolytic grade standard wire/bar/rod	0.85 Kg
Field Coil for Starter Motor	1 No	Field Coil for Starter Motor	1 No	Solder Tin - 80 Lead - 20%	0.03 Kg
Generator (Dynamo) Assembly	1 No	Field Coil for Starter Motor	1 No	Copper electrolytic grade standard wire/ bar/ rod	1.6 Kg
		Generator (Dynamo) Assembly	1 No	CR Steel Sheet extra deep drawing 0.8 to 1 mm thick	6.5 Kg
				Generator (Dynamo) Assembly	1 No	Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	1.2 Kg
						Generator (Dynamo) Assembly	1 No	Solder Tin - 80% Lead - 20 %	0.03 Kg
								Generator (Dynamo) Assembly	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.03 Kg
										Generator (Dynamo) Assembly	1 No	Carbon brush	2 No
												Generator (Dynamo) Assembly	1 No	Ball Bearings	2 No
Ignition Coil oil filled	1 No													Copper Wire enamelled 22 to 46 SWG	0.13 Kg
		Ignition Coil oil filled	1 No											Insulating Kraft paper electrical grade	0.02 Kg
				Ignition Coil oil filled	1 No									Silicon steel sheet 0.5 to 1 mm thick	0.3 Kg
Ignition Coil Resin Cost	1 No.					Copper electrolytic grade standard wire/ rod/ ingots	0.14 Kg
		Ignition Coil Resin Cost	1 No.			Insulating Kraft paper electrical grade	0.15 Kg
				Ignition Coil Resin Cost	1 No.	Silicon steel sheet 0.5 to 1 mm thick	0.80 Kg
						Ignition Coil Resin Cost	1 No.	Epoxide resin	0.075 Kg
								Ignition Coil Resin Cost	1 No.	Hardner	0.075 Kg
Slip Ring	1 No									Copper electrolytic grade standard wire/ bar/ rod	0.04 Kg
Starter Motor Armature for Low Speed Vehicles	1 No	Copper electrolytic grade standard wire/ bar/ rod	0.8 Kg
		Starter Motor Armature for Low Speed Vehicles	1 No	CR Steel Sheet extra deep drawing 0.5 to 1 mm thick	3.5 Kg
				Starter Motor Armature for Low Speed Vehicles	1 No	Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	1.5 Kg
						Starter Motor Armature for Low Speed Vehicles	1 No	Solder Tin - 80 % Lead - 20 %	0.02 Kg
								Starter Motor Armature for Low Speed Vehicles	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.04 Kg
Starter motor with maximum current 1100 Amps	1 No									Copper electrolytic grade standard wire/ bar/ rod	3.3 Kg
		Starter motor with maximum current 1100 Amps	1 No							CR Steel Sheet extra deep drawing 0.8 to 10 mm thick	13 Kg
				Starter motor with maximum current 1100 Amps	1 No					Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	2.1 Kg
						Starter motor with maximum current 1100 Amps	1 No			Solder Tin - 80 % Lead - 20 % RC 16 SWG	0.03 Kg
								Starter motor with maximum current 1100 Amps	1 No	Carbon brush	4 Nos
										Starter motor with maximum current 1100 Amps	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.06 Kg
Starter motor with maximum current 800 Amps	1 No											Copper electrolytic grade standard wire/ bar/ rod	2.5 Kg
		Starter motor with maximum current 800 Amps	1 No									CR Steel Sheet extra deep drawing 0.8 to 10 mm thick	10 Kg
				Starter motor with maximum current 800 Amps	1 No							Steel rod free cutting ENIA/SAE-8620 or eqv. 5-36 mm dia	2.1 Kg
						Starter motor with maximum current 800 Amps	1 No					Solder Tin - 80 % Lead - 20 % RC 16 SWG	0.03 Kg
								Starter motor with maximum current 800 Amps	1 No			Carbon brush	4 Nos
										Starter motor with maximum current 800 Amps	1 No	Polyester sheet/strip/film 25 to 200 Micron thick	0.06 Kg
Tungsten Disc alongwith Rod End, Cutting Sludge, Burnishing Sludge, Scrap Disc	1.0 kg containing 0.5 kg.Tungesten Disc.& 0.5 kg. remaining items											Tungsten Rod	1.1 kg
		Tungsten Disc alongwith Rod End, Cutting Sludge, Burnishing Sludge, Scrap Disc	1.0 kg containing 0.5 kg.Tungesten Disc.& 0.5 kg. remaining items									Alumina Oxide Abrasive Cutting Wheels - OD 180 mm, ID 12.7 mm and Thickness 0.42 mm	5 Nos.
Brush Gear Assembly (for automobile starter motor)	1 No.			Carbon Brushes of relevant specification	4 Nos.

TOP BUYING COUNTRIES of 8511 (ELECTRICAL IGNITION OR STARTINGEQUIPMENT OF A KIND USED FORSPARK-IGNITION OR COMPRESSION-IGNITION INTERNAL COMBUSTIONENGINES (FOR EXAMPLE, IGNITIONMAGNETOS, MAGNETO-DYNAMOS,IGNITION COILS, SPARKING PLUGSAND GLOW PLUGS, STARTER MOTORS); GENERAT ORS (FOR EXAMPLE, DYNAMOS, ALTERNATORS) AND CUT-OUTS OF A KIND USED IN CONJUNCTION WITH SUCH ENGINES)

S.No	Country Name	Shipment Value (Currency)	Total Buyers
No records found

Description:

REWARD UNDER MERCHANDISE EXPORTS FROM India SCHEME (MEIS) [AS % ON FOB VALUE OF EXPORTS]

Product Details

We like you just the way you are.